A Multi-Dimensional Measurement System For 3D UV Curing Applications

The 3DCure® is no longer available for sale. Calibration and service if possible until 31/12-2021.

3DCure® is a unique system for measuring the energy density (J/cm²) and peak irradiance (W/cm²) accurately on large and/or multi-dimensional objects.

Up to 32 sensors in any combination of UV bandwidths can be daisy-chained together and placed on every exposure surface in order to feed information back from up to 32 varied measurement points. 

The use of ultraviolet (UV) curing on dimensional and shaped objects continues to grow. UV cured coatings offer several advantages over solvent and/or water-bone coatings processed thermally or with IR. Line design, source placement and/or orientation, documentation of process limits and monitoring production conditions challenge users switching to UV curing technology.

The 3DCure® from EIT addresses these challenges in a simple, flexible and easy to use measurement system. The UV irradiance (W/cm2) and energy density (J/cm2) arriving at multiple points on the cure surface can be easily and simultaneously measured. The 3DCure® Sensors can be easily mounted or attached at any critical point as need, therefore avoiding repeated, time-consuming trials with a single radiometer in a single position.

The 3DCure® are available in any of EIT’s four standard bandwidths (UVA, UVB, UVC and UVV). 

Data is transferred to you PC via Cure_3D® software. Information can then be exported to a spreadsheet to allow analysis.